VMC1000 II
The VMC Ⅱ series is fixed by an A-shaped single column, with mobile structure of worktable, compact overall structure and small floor space. The design and manufacture conform to ISO and can complete milling, boring, drilling, tapping, and other processes under one clamp.
It is configured with standard 12,000 rpm belt spindle suitable for automobile parts, plastic machinery, construction machinery, and other fields.
High Shock Resistance
The column has a herringbone structure, and the bottom surface is fixed to the bed. The inside of the column’s uniquely shaped rib structure provides rigidity and shock resistance. The bottom portion is designed as an “A”-shaped structure, which effectively increases the rigidity of the column and reduces the forward tilt caused by the spindle box.
High Dynamic Response
The three-axis design allow for the AC servo motor and the elastic coupling to be directly connected at the lead screw, which directly drives the ball screw to rotate, realizing the reciprocating motion of each axis and fast dynamic response.
High Rigidity
The machine bed and main structure are cast in gray iron with good rigidity and shock absorption. The ribs are arranged inside the bed, allowing for a solid bed structure.
High Stability
The transverse sliding table and the worktable are made of gray cast iron, and designed with an extra-long span structure, which effectively increases the machine tool stability.
VMC1000 II
| Items | Unit | VMC1000 II |
| » Machining Capacity | ||
| X travel | mm | 1000 |
| Y travel | mm | 600 |
| Z travel | mm | 600 |
| Spindle nose to table surface | mm | 150-750 |
| » Table | - | |
| Table size | mm | 1200x600 |
| Table load | t | 0.8 |
| T slot | mm | 18x100x5 |
| » Feed Rate | ||
| Rapid traverse (X/Y/Z) | m/min | 36/36/36 |
| Cutting feedrate (X/Y/Z) | m/min | 15/15/15 |
| » Spindle | ||
| Max. spindle speed | rpm | 12000 |
| Spindle power | kW | 7.5/11 |
| Spindle torque | N.m | 35.8/70 |
| Spindle taper | - | BT40 |
| Pull stud | - | P40T - I -MAS403 |
| » Tool Magazine | ||
| Tool magazine capacity | T | 24 |
| Tool magazine type | - | Arm type |
| Max. tool dia. (Adjacent vacant) | mm | Φ80(Φ150) |
| Max. tool length | mm | 300 |
| Max. tool weight | kg | 8 |
| Tool change time | s | 2.5 |
| » Other | ||
| Power capacity | kVA | 30 |
| Machine weight | t | 6.5 |
| Machine size (L×W×H) | cm | 280x355x270 |
Standard Configuration
- Controller: Mitsubishi M80B
- 12000rpm belt drive spindle
- 24T ATC
- Pneumatic and lubrication system
- Cutting cooling
- Internal water flooding chip conveyor
- Full enclosure with top cover
- Air gun
- 3-color signal lamp, working light
- Standard accessories